Setup with Android

watch the video or follow the instructions


  • Download our app in the App Store ‘POM College’. The app will walk you through the setup process.
  • Make sure that your POM is charged.


Create an Account

Select “Create Account”

Fill in your information and select “Next”

Accept the Terms and Conditions by scrolling down and selecting “Accept”

Confirm your account by typing in the 4 digit code you will receive as an text message on your phone. If you don’t receive a code, check your email. If you didn’t receive an email or text message, please create a new account. 

Select “GEN2”

Connect your POM

Hold the side button down for one vibration. The POM will say ‘Power On’.

In the ‘POM College’ app select “Turn Bluetooth On” to begin pairing the POM to your Android.

Hold down the side button for ONE vibration, then DOUBLE click the side button. The POM will say “searching AUDIO connection”.

Click “Bluetooth Settings”. 

In the “Bluetooth Settings” confirm that Bluetooth is turned on and then click “Scan for devices”. 

Select “POM xxxx Audio” in the list of “Available Devices” to pair your Android to the POM device. The POM will say “audio connected”.

Return the ‘POM College’ app. The POM will ring to indicate a successful Bluetooth connection. After it rings select “Yes, the POM rang”. If it does not ring, follow the instructions detailed within the app to forget the device and attempt to pair the POM again. 

You are now connected! Click “Done” to return to the app. 

Make a Test Call

When you see this screen, tap the center button THREE times. Your POM will initiate a phone call without reach emergency responders. It will say “You have made a successful test call. Please say your name and then hang up.”

Click “Tap here to add important information for emergency calls” to complete your profile OR click “Login” and your setup is complete!